SIMKA Tinted Facial Fluid SPF 50
|
Laser + LED Combined
|
Four Wavelengths
|
TGA Approved
|
50ml
UVA + UVB BROAD SPECTRUM
A dry-touch, dual-filter formula, SIMKA Tinted Facial Fluid offers sheer, tinted coverage for a luminous complexion.
Formulated with SIMKASHIELD™️ Technology, it protects your skin from harmful UVA and UVB rays. Packed with powerful antioxidants, including vitamin C, and age-management ingredients, it supports, renews, and protects skin from premature ageing, UV damage, and pollutants.
Designed for effortless, minimal coverage, SIMKA Tinted Facial Fluid SPF 50 provides broad-spectrum UV protection, evens skin tone, and reduces the appearance of redness. Whether worn alone or as a primer under makeup, it’s perfect for achieving a no-makeup makeup look
$76.00
About Tinted Facial Fluid SPF 50
SIMKASHIELD™ Technology uses a breakthrough in skincare science, formulated to surpass the limitations of conventional sun protection products. Our unique antioxidant blend doesn’t just shield your skin from the sun’s harmful rays; it elevates your skincare routine, offering comprehensive benefits that extend beyond sun protection and blur the line between sun protection and traditional skincare.
Sheer Mineral Milk SPF 50 Benefits
- Dual-filter formulation
- Lightweight, sheer tinted coverage
- Evens skin tone, reduces appearance of redness
- Wear alone or layer under makeup
- A perfect everyday SPF
- Buildable coverage from sheer to medium
- Infused with age management ingredients
Ingredients
Active Ingredient: Bemotrizinol 40.05mg/g, Diethylamino
hydroxybenzoyl hexyl benzoate 40mg/g, Phenylbenzimidazole
sulfonic acid 30 mg/g, Titanium dioxide 20mg/g
Full Ingredient List
Water, C12-15 Alkyl Benzoate, Propanediol, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Ethylhexyl Methoxycrylene, Dicaprylyl Carbonate, Phenylbenzimidazole Sulfonic Acid, Titanium Dioxide, Silica, Pentylene Glycol, Acrylates/C12-22 Alkyl Methacrylate Copolymer, Iron Oxides, Bis-Ethylhexyl Hydroxydimethoxy Benzylmalonate, Potassium Cetyl Phosphate, Microcrystalline Cellulose, Ascorbyl Tetraisopalmitate, Hydroxyacetophenone, Sodium Hydroxide, Arginine, Aluminium Hydroxide, Stearic Acid, Caprylyl Glycol, 1,2-Hexanediol, Coco-Glucoside, Xanthan Gum, Cellulose Gum, Disodium Lauryl Sulfosuccinate, Tocopherol
USAGE
Shake well before each use. Apply a generous amount to clean, dry skin after your moisturiser. Always apply 15-20 minutes before sun exposure. Re-apply regularly, particularly after exercise and swimming.
WARNING
For external use only. Avoid contact with eyes and do not apply on broken or damaged skin. Avoid prolonged exposure to damaging UV rays. Always wear protective clothing, a hat and eyewear when exposed to the sun.
Our recommendation is to avoid using sunscreen on babies under 6 months old. This is because their skin is much more sensitive than older children and adults. It’s important to follow the latest guidelines and recommendations from health authorities and organisations such as the Australian Cancer Council.
Meet The NEW Regenix Laser + LED Face Mask
Key Features
The Regenix Laser + LED Face Mask combines LED and laser light in one soft, flexible silicone mask for home use. It uses four wavelengths, including 460nm blue, 665nm red, 850nm near-infrared and 1064nm near-infrared laser technology. The device has 236 total light sources, plus two treatment modes so you can choose the setting that best suits your skin focus.
What it targets
This mask has been created for skin concerns such as loss of firmness, uneven texture, dullness and visible signs of ageing. It also includes a blue light mode for breakout-prone or congested skin, while the red and near-infrared wavelengths focus more on firmness, tone, radiance and deeper skin support.
How to use it
Use the mask on clean, dry skin before applying skincare. Place it comfortably on the face, secure the strap, turn it on with the remote and choose your treatment mode. Sessions are usually 5, 10 or 15 minutes, with the supplied pages recommending consistent use around 3 to 5 times per week. After using the mask, remove it and continue with your serum or moisturiser.
So what is Laser Light and how is it different?
The Difference Between Laser and LED
Most at-home masks use LED light, which spreads more broadly across the skin. Laser light is focused and coherent, meaning it travels in a concentrated beam that penetrates deep into the skin with precision. LED light is scattered, covering a broader surface area and working across multiple tissue depths simultaneously. Both are clinically backed forms of light therapy, but they work in fundamentally different ways.
The Regenix Laser + LED Face Mask does not rely on LED alone. It combines LED with VCSEL laser diodes, including 1064nm near-infrared laser technology, which is the deepest-reaching wavelength in the mask.
How They Work Together
Where LED delivers broad, even coverage across the skin, laser targets deeper layers with greater intensity.
Used together in a single session, they complement each other to address surface-level concerns like uneven tone, fine lines, and skin texture, while simultaneously working deeper to support collagen production, cellular repair, and long-term skin health.
Visibly Glowing Skin in 30 Days
Pigmentation
| LIGHT | Red/Near-Infrared |
| SESSIONS | 12 Treatments |
| LENGTH | 10 Minutes |
| DURATION | 3 Weeks |
Anti-Ageing
| LIGHT | Red/Near-Infrared |
| SESSIONS | 30 Treatments |
| LENGTH | 10 Minutes |
| DURATION | 8 Weeks |
Anti-Ageing
| LIGHT | Red/Near-Infrared |
| SESSIONS | 18 Treatments |
| LENGTH | 10 Minutes |
| DURATION | 5 Weeks |
Choose Your Treatment
Red Mode - Firm Skin
665nm + 850nm + 1064nm (Full Laser)
Red Mode is the anti-ageing setting, and this mode is all laser. The 665nm red laser supports collagen, elasticity and fine lines, while the 850nm and 1064nm near-infrared wavelengths reach more deeply for repair, circulation and deeper visible signs of ageing.
Blue Mode - Clear Skin
460nm + 850nm (LED & Laser)
Blue Mode is the clearer-skin setting. It combines 460nm blue LED with 850nm near-infrared laser, so you’re targeting the bacteria associated with breakouts at the surface and near infrared working beneath to calm inflammation and support recovery. Together, they address both the breakout and the skin’s response to it.
