Regenix Laser + LED Mask
|
Laser + LED Combined
|
Four Wavelengths
|
TGA Approved
|
Regenix Laser + LED Mask is one of the first at-home masks available in New Zealand with both laser and 1064nm near-infrared, the deepest penetrating wavelength available.
This is a Class IIa medical device with 164 VCSEL lasers, clinically proven to reduce fine lines, plump skin and reverse the visible signs of ageing. It doesn’t get much better than this.
From Jemma:
We are so excited to introduce you all to Regenix, our new high performance brand. We’re launching with the Regenix Laser + LED Mask into Skin Health Clinic so our clients are able to gain the first access to this new at-home technology.
$999.00
Wavelength Guide
- 665nm Red Laser: Stimulates collagen, improves elasticity, supports smoother texture, and reduces fine lines.
- 460nm Blue LED: Targets surface bacteria and inflammation, ideal for oily or breakout-prone skin.
- 850nm Near-Infrared Laser: Enhances circulation, promotes healing, supports cellular repair, and improves skin vitality.
- 1064nm Near-Infrared Laser: Penetrates more deeply than any other cosmetic wavelength, helping address stubborn pigmentation, redness, dullness, and deeper-layer concerns.
Treatment Guidelines/How To Use
- Start with clean, dry skin.
- Adjust the strap and place the mask securely on your face.
- Hold the power button for two seconds to turn it on.
- Press M to switch between Mode 1 and Mode 2.
- Select your timer: 5, 10, or 15 minutes.
- Adjust brightness to Low, Medium, or High.
- Relax and enjoy the session as the mask works through the set duration.
- After treatment, continue with your usual skincare routine.
Routine: Use 3–5 times per week, 5-10 minutes a session, for smoother, firmer, refreshed skin.
Laser Therapy Mask Specifications
- Light Sources: 236 total (164 VCSEL lasers + 72 LEDs)
- Wavelengths:
- 665nm red laser
- 460nm blue LED
- 850nm near-infrared laser
- 1064nm near-infrared laser
- Modes:
- Mode 1: 665nm + 850nm + 1064nm (Full Laser)
- Mode 2: 460nm + 850nm (LED + Laser)
- Irradiance: Laser ≥ 50 mW/cm², LED ≥ 30 mW/cm²
- Timer Options: 5 / 10 / 15 minutes
- Brightness Levels: 50% / 75% / 100%
- Battery: 1440 mAh rechargeable (USB-C, 5V/2A)
- Material: Food-grade silicone
- Colour: Beige
- Size: 640 × 220 × 5.8 mm
- Warranty: 2 Years
Meet The NEW Regenix Laser + LED Face Mask
Key Features
The Regenix Laser + LED Face Mask combines LED and laser light in one soft, flexible silicone mask for home use. It uses four wavelengths, including 460nm blue, 665nm red, 850nm near-infrared and 1064nm near-infrared laser technology. The device has 236 total light sources, plus two treatment modes so you can choose the setting that best suits your skin focus.
What it targets
This mask has been created for skin concerns such as loss of firmness, uneven texture, dullness and visible signs of ageing. It also includes a blue light mode for breakout-prone or congested skin, while the red and near-infrared wavelengths focus more on firmness, tone, radiance and deeper skin support.
How to use it
Use the mask on clean, dry skin before applying skincare. Place it comfortably on the face, secure the strap, turn it on with the remote and choose your treatment mode. Sessions are usually 5, 10 or 15 minutes, with the supplied pages recommending consistent use around 3 to 5 times per week. After using the mask, remove it and continue with your serum or moisturiser.
So what is Laser Light and how is it different?
The Difference Between Laser and LED
Most at-home masks use LED light, which spreads more broadly across the skin. Laser light is focused and coherent, meaning it travels in a concentrated beam that penetrates deep into the skin with precision. LED light is scattered, covering a broader surface area and working across multiple tissue depths simultaneously. Both are clinically backed forms of light therapy, but they work in fundamentally different ways.
The Regenix Laser + LED Face Mask does not rely on LED alone. It combines LED with VCSEL laser diodes, including 1064nm near-infrared laser technology, which is the deepest-reaching wavelength in the mask.
How They Work Together
Where LED delivers broad, even coverage across the skin, laser targets deeper layers with greater intensity.
Used together in a single session, they complement each other to address surface-level concerns like uneven tone, fine lines, and skin texture, while simultaneously working deeper to support collagen production, cellular repair, and long-term skin health.
Visibly Glowing Skin in 30 Days
Pigmentation
| LIGHT | Red/Near-Infrared |
| SESSIONS | 12 Treatments |
| LENGTH | 10 Minutes |
| DURATION | 3 Weeks |
Anti-Ageing
| LIGHT | Red/Near-Infrared |
| SESSIONS | 30 Treatments |
| LENGTH | 10 Minutes |
| DURATION | 8 Weeks |
Anti-Ageing
| LIGHT | Red/Near-Infrared |
| SESSIONS | 18 Treatments |
| LENGTH | 10 Minutes |
| DURATION | 5 Weeks |
Choose Your Treatment
Red Mode - Firm Skin
665nm + 850nm + 1064nm (Full Laser)
Red Mode is the anti-ageing setting, and this mode is all laser. The 665nm red laser supports collagen, elasticity and fine lines, while the 850nm and 1064nm near-infrared wavelengths reach more deeply for repair, circulation and deeper visible signs of ageing.
Blue Mode - Clear Skin
460nm + 850nm (LED & Laser)
Blue Mode is the clearer-skin setting. It combines 460nm blue LED with 850nm near-infrared laser, so you’re targeting the bacteria associated with breakouts at the surface and near infrared working beneath to calm inflammation and support recovery. Together, they address both the breakout and the skin’s response to it.
